Tag Archives: esxi

Install ESXi through VMware Go

Since the folks over at the VMware Go team liked my first post so much, I figured I’d oblige and write up an article about how to install ESXi through VMware Go since they tweeted about it before I actually wrote it 🙂

VMware Go, for those that missed the last post, is a cloud based service for small businesses and new VMware admins to help manage and setup their VMware environment.  There are “two” ways to install ESXi from VMware go – by converting an existing Windows server/machine or downloading the ISO and installing manually.  The later isn’t really installing “through” VMware Go but certainly a viable path, and then you can simply add the host once your install is finished.

Once logged into VMware Go, click on the Virtual tab and select Install an ESXi Hypervisor from the drop down menu.

installesxi

Click the Get Started button on the next screen and provide the IP address of the Windows server you wish to convert and click the Next button.

installIP

VMware Go will connect to the IP address of the computer to determine if it is compatible, when prompted enter the username and password for that server.  The machine I tried to install on failed the compatibility check as you can see here:

hardwarefail

Thankfully I am doing this in a VM so one second while I go reconfigure that machine…and we are back and the machine passed the test this time as you can see:

hardwarepass

I popped in my hostname and opted for DHCP config.  Make sure you pay attention to the warning – Windows will be gone!  Make sure you backed up your data, settings etc… if you need anything from this server and click next.  You will see a summary of the actions to be taken.  If you are ready to take the plunge, click the Start ESXi Hypervisor Installation!

startAfter confirming you will blow away your Windows install, you will be prompted for the ESXi password you wish to set, and then need to enter the Windows credentials again.  You can see the task/download/install progress at the top of the screen:

download

Queue on hold music in your head….daaa na na naa naa na.  Less than 20 minutes and a few reboots later I had an ESXi screen where my Windows login screen once appeared and can see the task completed in VMware Go.

taskdone

 

VMware Go was even nice enough to add it to its inventory for me!  So thats it, without ever touching an ISO I nuked my Windows server and turned it into a functional ESXi server!.

Advertisements

vSphere 5.1 syslog collector sum up via @silver_chen_au

Great write up

GeekSilver's Blog

It’s shame that it took me 2 hours to find out why my Syslog Collector is not working. But I would like to share my experience with everyone including how to debug it.

Syslog collector has two parts.

Part running on vCenter

 

Syslog Collector must be installed first.

clip_image002

clip_image002[6]

It is very important to configure your firewall so your syslog can go through.

the Syslog collector can use 3 different protocol. TCP,UDP,SSL. You can enable all of them.

clip_image002[8]

make sure you have space for this log collector

clip_image002[10]

that’s will install plug-in directly into your vCenter.

image

Feel free to use your DOMAIN/SERVICE_ACCOUNT to replace local administrator. But you need to make sure that service_account has local admin rights first.

By using different account will make better view in the TASK Manager to see how much memory it consumes.

 

clip_image002[14]

You can replace SSL certificate with local CA certificate if you really…

View original post 288 more words